Member's Rides (past & present)

 

427 Shelby Cobra Replica - Body and Chassis by Cardiac

Owners: Dal & Pat

Exterior:

This car is painted with BASF medium blue and silver base clear metallic.  Power and hand polished.  Chrome over brass windshield.  Tempered glass windwings.  Bumpers and body hardware are exact t original.  Cockpit tonneau cover included.

Chassis:

Very strong rectangular tube section set up for Art Morrison front suspension with urethane bushings and Aldan Eagle coil over shocks Center section Cross membered to withstand the torque of a high horsepower big block engine.  Rear of frame is set up for Jag suspension that has been modified with rear torque rods to accept high horsepower.

Engine:

Balanced 460 completely re-machined, zero balanced, blueprinted and assembled with heavy duty connecting rods and Keith Black pistons.  Heads are aluminum Cobra Jet with large ports at 10:25:1 compression ratio.  Competition Cam camshaft with Crane roller rockers.  Enlarged oiling system with windage tray.  Intake manifold is a large port Blue Thunder to match the CJ heads.  Carb is a Barry Grant vacuum secondary unit that flows 920 CFM.  Chromed aluminum turkey pan, original chromed surge tank.

Transmission:

Large shaft close ration top loader 4 speed with NASCAR finned cover.  Hurst Indy 4 speed shifter.  McLeod 11" clutch assembly.

Rear Axle:

Jag IRS with #:31 gears and power lock, lower control arms are modified to withstand high horsepower.  Four Aldan Eagle adjustable coil over shocks.  Chromed cover and torque rods with Aircraft quality hiem joints.

Interior:

Black leather original styled seats, padded dash and door panels.

Black Wilton wool carpet and trunk.

Wheels & Tires:

7 1/2x15 and 10x15 Centerline polished wheels with ERA cast aluminum inserts and Halibrand wing nuts.  235x60 and 295x50 Goodyear Eagle tires.

Smith instruments with reverse speedo.  Lucas switches 15" wood rimmed steering wheel.  Fully functional heater system with outside air to foot boxes.  Three inch seat belts and shoulder harness with Formula One lock assemblies.  Original Ford 4 speed shift handle.

Body:

Built to original dimensions and is constructed of hand laid fiberglass with integral cockpit.  Plus it was heat cured prior to assembly.  Hood has an authentic aluminum scoop which is riveted on as original.  Roll bar is attached directly to the frame and is fully functional.

 

1965 – 427s/c Shelby Cobra Replica - By Superformance

Owners: Rod

2000 Superformance (Not a Kit Car) Factory built in South Africa at Carroll Shelby's authorized assembly plant!

It's a replica of a 1965 427semi/competition Shelby Cobra, Built to dominate Ferrari on European road racing circuits, Shelby never meet homologation requirements of 100 units and the 427s/c never turned a wheel in anger against Ferrari, consequently the 31 original 427s/c where sold as street cars!

This factory replica of those fantastic road racing cars features a 427w 540hp, Tremec TKO 5spd, Aluminum 3:73 posi-independent rear, Knock-on Hlibrand pin drive indy wheels, New Goodyear 235/60/15 and 295/50/15 tires, Bilstein coilovers, f/r stabilizer bars, Wilwood 4 piston calipers, 304 grade Stainless steel 22 gallon fuel tank with BG electric fuel pump, Aluminum rad w/ dual electric fans, Leather interior, Wilton wool carpet, Crow 3" five point racing harnesses, Soft top, Tonneau, S/C style Dash that has been personally signed by Carroll Shelby!

Washed and polished weekly using Zanio Bros. products with over 100 coats of polish, stored in a heated garage, Red Line lubricants used in the engine gear box and diff, used primarily as a show car and for trips into the mountains.

 

1965 – 427 Shelby Cobra Replica

Owner:

Vehicle Specifications & Details

  • Unique Motorcars Serial 9284

  • Show car completed in 1997, 4002 miles on odometer

  • Yellow base exterior with white stripes

  • Black interior, leather seats

  • Full soft top, hard part side windows, tonneau cover

  • 427 Side-oiler engine, 450 H.P., complete rebuild, balanced and blue printed, 010-010 crank, Edelbrock performer intake, Holley carburetor

  • Aluminium radiator and oil cooler

  • Ford 4 speed top loader transmission with Hurst shifter, Lakewood blow proof bell housing, Hayes clutch, pressure plate and throw out bearing

  • Jag Type “E” rear end with posi-track, MG modified front end Compomotive alloy wheels, Dunlop GT Qualifier W/L Sport

  • Custom built Cobra trailer included

  • Over $60,000.00 Cdn. Invested, not including labour

  • Appraised at $75,000.00 for insurance purposes

  • Open for offers

Invoices Available Upon Request
Unique Motorcars $36,075.00 US Abbotsford Auto  Body $6,004.52 Cdn
  $7,890.00 US Top Gun Coatings $399.00 Cdn
Grady Love $12,000.00 US    

 

1965 – 427 Shelby Cobra Replica

New Owner: ?

Vehicle Specifications & Details

  • 2000 Can-Am Cobra Roadster (Model 427 SC-R) 

  • Manufactured and arrived Turnkey from Johnex MotorSports in association with Can-Am MotorSports

  • Frame built on a CSC Racing designed tubular frame chassis that uses 2"x4" rectangular steel tubing as the main perimeter frame rail and 1 and 3/4 round tube upper frame rails with a triple cowl hoop for additional support.

  • Double-sheer suspension bracketry, coil over suspension and pro adjustable rear shocks.

  • Tildon peddle attachments (constructed from heavy aluminum castings).

  • 2 separate master cylinders operate the brake system with11" disc and oversized callipers in front and drum brakes in the rear.

  • Rack and pinion steering.

  • Ford 8.8", 3.50 pos with a 327 gear ratio.

  • .Ford 5.0 litre with an Edelbrock Performance intake manifold, a 600 CFM Holley carburetor and an MSD ignition system.

  • Ford 5 speed overdrive model T5

  • High quality hand laid and baked fiberglass body, in the Can-Am Cobra Deluxe 427 style. Chrome roll bar with flat black side pipes.

  • BMW blue paint.

  • Black vinyl/carpet, VDO gages with Grant GT steering wheel.  RJS 2" 4 point harness seat belts.

  • 15" Five Star chrome plated steel wheels with BF Goodrich T/A tires.

  • Cost $55,000.00 Canadian/ $35,000.00 US.

* Most cars are located in the Vancouver BC Canada area.